Compare
Need lighter and more efficient? GT2 2mm belts are the other belt page. Shop GT2 2mm belts
| GT2 2mm | HTD 5mmThis page | Chain | |
|---|---|---|---|
| Strength | Fair | Good | Amazing |
| Weight | Amazing | Good | Fair |
| Efficiency | Amazing | Good | Good |
| Best for | FTC intakes, shooters, elevators, and other light, high-efficiency loads | FTC drivetrains, elevators, and arms; FRC intakes and elevators | Almost anything if you can take the extra weight and bulk |
| Notes | Compact. Closed-loop, so you pick a tooth count. | Compact. Higher load than GT2. | Cut any length with a chain tool. Heavier and less compact than belts. |
SWYFT Tools
Belt center-to-center calculator
Solve CTC for HTD 5mm or GT2, or pick the nearest in-stock belt for that pitch and width.
Add 0 for lower-load applications like shooters; add more (e.g. 0.02") for higher-torque applications.
Center to center
187.585 mm
100T in 9 mm is in stock.
Shop this beltBelt and chain math from Recalc (reca.lc) by Justin Tervay, MIT License.
Drive FTC and FRC mechanisms with SWYFT HTD 5mm timing pulleys. Machined from aluminum 6061 with a 1/2" hex bore, these pulleys accept HTD 5mm belts up to 9mm wide and pair with HTD timing belts.
HTD 5mm pulleys for FTC and FRC, designed by SWYFT Robotics.
Also See: HTD Timing Belts
Also See: Axle Adapters
Also See: SWYFT Shaft Collars
| Size | STEP | Drawing |
|---|---|---|
| 14 Tooth | STEP | |
| 16 Tooth | STEP | |
| 20 Tooth | STEP | |
| 24 Tooth | STEP | |
| 30 Tooth | STEP | |
| 36 Tooth | STEP |
Motion
