SWYFT Composite
SRPP Sheet · Multiple Sizes · FTC & FRC
High-strength, ultra-lightweight sheet material for competition robot panels.
100% SRPP — solid sheet, no foam core.
- Higher strength-to-weight ratio than aluminum sheet
- Cuts cleanly on our CO2 laser cutters
- 6mm variant adds a foam core for extra stiffness without added mass
- Developed and refined by SWYFT Robotics for competition use
Material Quality
High-strength, ultra-lightweight sheet material for competition robot panels.
SWYFT Composite is SRPP — a self-reinforced polypropylene that outperforms aluminum sheet in strength-to-weight ratio. Available in 1.75mm, 3mm, and 6mm (the 6mm adds a foam core). Cuts cleanly on our CO2 laser cutters.
- Higher strength-to-weight ratio than aluminum sheet
- Cuts cleanly on our CO2 laser cutters
- 6mm variant adds a foam core for extra stiffness without added mass
- Developed and refined by SWYFT Robotics for competition use
Specifications
Built for performance
Every spec designed around competitive fabrication
Thickness
1.75mm, 3mm, or 6mm
Sheet Size
610–737mm
Manufacturing Method
Laser cutting
Strength
Beats aluminum by weight
Best Use
Panels, bellypans
Real-world use
What you can build
Parts teams fabricate every build season
Bellypans
Lightweight bellypans and chassis floor panels that save weight vs aluminum.
Superstructure
Robot superstructure panels where every gram affects performance.
Covers & Guards
Robot covers that protect electronics without adding parasitic weight.
Mechanism Bases
Structural bases for arms, lifts, and mechanisms.
Specifications
SWYFT Composite Technical Specs
| Material | SRPP (Self-Reinforced Polypropylene) |
| Available Thickness | 1.75mm, 3mm, or 6mm |
| Sheet Size | 660×737mm (1.75mm) · 610×610mm (3mm & 6mm) |
| Core | Solid SRPP (1.75/3mm) · foam core (6mm) |
| Manufacturing Method | Laser cutting |
| Laser Cutting | Compatible with our CO2 laser cutters |
Compatible Machines
SWYFT machines that process this material with recommended cut settings
Buy Together
Materials recommended for this machine
100W CO2 Laser Cutter (40" × 32")
A 100W CO2 laser with motorized autofocus and a full-size 40×32" (1000×800mm) bed for FRC panels and shop production. Front-and-rear pass-through feeds oversized stock, and autofocus dials in the focal height automatically for a good cut on the first try.
100W CO2 Laser Cutter (40" × 32")
A 100W CO2 laser with motorized autofocus and a full-size 40×32" (1000×800mm) bed for FRC panels and shop production. Front-and-rear pass-through feeds oversized stock, and autofocus dials in the focal height automatically for a good cut on the first try.
Also consider
