Acetal Sheets
3mm Delrin Sheet · 600×600mm · FTC & FRC
Low-friction, machinable Delrin for robot mechanisms, slides, and structural panels.
- Low friction — ideal for sliding and rotating mechanisms
- Cuts cleanly on our CO2 laser cutters with minimal edge cleanup
- Machines to tight tolerances on the OMIO CNC
- Compatible with laser cutting, CNC machining, drilling, and tapping
Material Quality
Low-friction, machinable Delrin for robot mechanisms, slides, and structural panels.
Natural-color acetal (Delrin) sheet stock. 1/8” / 3mm thick, 23.6×23.6” (600×600mm). Laser-cuts cleanly on our CO2 laser cutters. CNC-machines to tight tolerances. Used by championship FTC and FRC teams for slides, gears, and structural panels.
- Low friction — ideal for sliding and rotating mechanisms
- Cuts cleanly on our CO2 laser cutters with minimal edge cleanup
- Machines to tight tolerances on the OMIO CNC
- Compatible with laser cutting, CNC machining, drilling, and tapping
Specifications
Built for performance
Every spec designed around competitive fabrication
Thickness
1/8” / 3mm
Sheet Size
23.6” × 23.6”
Manufacturing Method
Laser + CNC
Strength
Low-friction, wear resistant
Best Use
Slides, gears, brackets
Real-world use
What you can build
Parts teams fabricate every build season
Linear Slides
Cut low-friction slide rails and carriage plates.
Gear Faces
Machine precise gear blanks and sprocket faces.
Bushings
Turn or machine shaft spacers and bearing blocks.
Structural Panels
Cut panels and brackets with clean finished edges.
Specifications
Acetal Sheets Technical Specs
| Material | Acetal (Delrin) |
| Thickness | 1/8” / 3mm |
| Sheet Size | 23.6” × 23.6” / 600×600mm |
| Color | Natural (white/off-white) |
| Laser Cutting | Compatible with our CO2 laser cutters |
| CNC Machining | Compatible with OMIO CNC |
| Drilling | Yes |
| Tapping | Yes |
Compatible Machines
SWYFT machines that process this material with recommended cut settings
Buy Together
Materials recommended for this machine
100W CO2 Laser Cutter (40" × 32")
A 100W CO2 laser with motorized autofocus and a full-size 40×32" (1000×800mm) bed for FRC panels and shop production. Front-and-rear pass-through feeds oversized stock, and autofocus dials in the focal height automatically for a good cut on the first try.
SWYFT Composite
SWYFT Composite is SRPP — a self-reinforced polypropylene that outperforms aluminum sheet in strength-to-weight ratio. Available in 1.75mm, 3mm, and 6mm (the 6mm adds a foam core). Cuts cleanly on our CO2 laser cutters.
Also consider
